Adn564mp4 Install Patched (TRENDING – Series)

Mount this on the top center of the rear window. If you have a hatchback, ensure there is enough slack in the cable for the door to open fully. 3. Routing the Cables This is the part that defines a "clean" install.

Use the live view on the screen to tilt the side and rear lenses. You want a 60/40 split (60% road, 40% sky) for the best exposure levels.

Before you start tucking wires into your headliner, perform a "bench test." adn564mp4 install

Bolt this to a bare metal part of the car’s chassis. 5. Final Configuration and App Sync Once the hardware is secure, finish the setup:

The ADN564MP4 requires a high-speed MicroSD card (Class 10 or U3). Format the card within the device settings menu to ensure compatibility. Mount this on the top center of the rear window

Plug the main console into your car’s cigarette lighter or a USB power source. Ensure the screen turns on and all four camera feeds are displaying correctly.

If you want to use the ADN564MP4’s 24-hour parking monitor, you cannot use the cigarette lighter plug. You will need a . Routing the Cables This is the part that

Run the power cable from the main unit up into the headliner, down the A-pillar (be careful to run it behind the airbag), and into the center console or fuse box.