Some 1.8V chips require a level shifter adapter. Attempting to flash them at 3.3V with the standard CH341A can permanently damage the chip. Conclusion
Usually caused by a poor connection with the SOP8 clip. Ensure the pins are clean and the clip is seated firmly. Asprogrammer 2.1.0.13
Enhanced support for newer Winbond, Macronix, and GigaDevice chips often found in modern UEFI BIOS setups. Some 1
Improved handling of Status Registers, which is crucial for removing "Write Protect" flags on certain chips. Ensure the pins are clean and the clip is seated firmly
This often happens if the "Erase" step was skipped. You cannot write new data over old data without a full erase.
Always click Read IC followed by Save File . Never flash a new BIOS without backing up the original dump.
Ensure you have the CH341PAR driver installed (not the Serial/COM driver).