Avery Berkel L126 Calibration -

Ensure the scale platform is empty and clean. The display will prompt "Load Zero" . Press the Test button to capture the zero point. The scale will scroll for a few seconds as it stabilizes.

The display will prompt for a weight (e.g., "Load 10" ). Gently place your certified 10lb (or equivalent metric) weight onto the center of the platform. Press the Test button again. avery berkel l126 calibration

Press the Zero button twice until the display shows "CAL" (Calibration). Confirm your selection by pressing the Test or Store button. Ensure the scale platform is empty and clean

Remove the weight and press the Test button to restart the unit. The scale will go through its warm-up routine and return to zero. How to Perform a Zero Reset The scale will scroll for a few seconds as it stabilizes

If your scale is showing a "Zero Capture" error (often indicating the cell is out of its 2% tolerance), you may need to perform a simple reset without a full span calibration: Access the micro-switch on the circuit board.