Canon Imagerunner 2420 Scanner Setup Upd Verified -

Right-click the folder > Properties > Sharing > Share . Add "Everyone" and set permissions to Read/Write .

Open the ScanGear Tool from your programs list.

Execute Setup.exe and follow the on-screen prompts. canon imagerunner 2420 scanner setup upd

Obtain the machine’s IP address from your system administrator or via the device's control panel.

To use the ScanGear driver, the imageRUNNER 2420 must be put in "Online" mode. Press the button on the control panel. Select [Remote Scan] . Right-click the folder > Properties > Sharing > Share

Use the System Manager ID and PIN (defaults are often 7654321 or 1234567). Register Destination: Navigate to Address Book > Register New Dest. > File . Protocol: Select Windows (SMB) . Host Name: Enter your PC's name.

Click Discover to find the scanner on your network or enter its IP address manually. Select the device and click OK . 3. Setting Up "Remote Scan" on the Device Execute Setup

Note that for some models like the iR 2420L, scanning is only possible if a network card is installed.

On your PC, open a TWAIN-compliant application (like Adobe Acrobat or Windows Fax and Scan) to start the scan. 4. Configuring "Scan to Folder" (SMB)

If the driver installation fails on Windows 10/11, try running the installer in Compatibility Mode or updating via Device Manager .