Circutor Computer 8d-96 Manual !!exclusive!! Info

Before beginning, ensure the main power is disconnected and wait at least 5 minutes for any existing capacitors to discharge fully.

Standard models support 230V or 400V AC (+15%, -10%). Dimensions: Standard 92x92 mm panel cut-out (DIN 43 700). Accuracy: 1% for voltage and current; 2% for phase angle ( 2. Mechanical and Electrical Installation circutor computer 8d-96 manual

Install a CT (typically .../5 A) on the main phase L1. The CT ratio should be at least 1.5 times the maximum expected load current. Before beginning, ensure the main power is disconnected

3-digit LED display with icons for real-time status. Capacitor Steps: Controls up to 8 steps (relay outputs). Measurement: True RMS measurement of current and voltage. Accuracy: 1% for voltage and current; 2% for phase angle ( 2

Connect the common terminal to the control circuit of the capacitor contactors. Outputs 1 through 8 are assigned to the respective capacitor steps. 3. Programming and Setup