Commax Dpra01 Installation Manual Link Work < OFFICIAL ⟶ >

If you are looking for the official PDF documentation, check these common repositories:

The DP-RA01 is usually powered by the master unit or an AC 110V/220V source depending on the specific sub-model (Check the sticker on the back of your unit). 3. Mounting the Bracket

The DP-RA01 typically uses a connection. Cable Type: TIV 0.65mm or higher. Distance: Up to 100 meters (330 feet) using 0.65mm wire. commax dpra01 installation manual link

The DP-RA01 usually triggers a dry contact on the master unit. Check the wiring between the master station and the electric strike.

Attach the metal or plastic wall bracket to the wall box using the provided screws. If you are looking for the official PDF

Verify if your specific DP-RA01 model requires direct AC power or if it is powered by the signal line. Connecting AC power to a DC-only terminal will destroy the unit.

Are you connecting this to a (like the DR-2K)? Is your unit battery-powered or plugged into a wall outlet ? Are you trying to link multiple room stations together? Cable Type: TIV 0

Keep the intercom wiring at least 30cm away from AC power lines to avoid "humming" or static noise in the audio.

Ensure the bracket is level to prevent the handset from hanging crookedly.