Digi Sm320 Service Manual May 2026

Configure weighing patterns and barcodes through the system setup menu (Function -> System Setup -> Setting 15) to ensure compatibility with your POS system. Troubleshooting Common Error Codes

Securely connect the serial cables between the scale and the pole, ensuring the latches click.

Secure the green latch and push the side panel back. Perform a test print to verify alignment. Display Assembly (SM-320P Models) To assemble the pole display on DIGI SM-320P models, follow these steps: digi sm320 service manual

Use the open switch to lift the print head panel.

Table_title: Basic Table_content: header: | Model | SM-320 | | | | row: | Model: Capacity | SM-320: 3/6 kg | : 6/15 kg | : | : 15/ DIGI (TERAOKA) SM-320 | Retail - DIGI (TERAOKA) Configure weighing patterns and barcodes through the system

If your scale displays an error, first ensure it is on a level, stable surface and that the power supply is secure. SM-320 | Retail | DIGI America

Proper initial setup ensures the longevity of the thermal print head and the accuracy of the load cells. Loading Label Rolls Perform a test print to verify alignment

To enter calibration mode, press the Span Switch , then in Z-Mode, hold RE-ZERO and enter code 8715 . Follow the on-screen prompts to place test weights (e.g., 3kg for a 15kg capacity scale) and press the asterisk * key to finalize.