Easyjet Xp600 Driver Install |work| -

After the driver is installed, you must configure the printing parameters:

Installing the driver for an printer (often used in eco-solvent, UV, or DTF printing) typically involves two main parts: installing the machine's control software and then "installing" the specific printer driver/ICC profiles into your RIP software, such as Maintop . Pre-Installation Checklist

: If using a network connection, you may need to manually set your PC's IP address (e.g., to 196.12.0.188 ) to communicate with the printer. Step 1: Install RIP Software (Maintop) EasyJet XP600 easyjet xp600 driver install

: Create a desktop shortcut for "MainTop" and "MainTop Print Manager" for easy access. Step 2: Install the EasyJet XP600 Driver into Maintop Once Maintop is running, you must add the specific EasyJet XP600 parameters: Open Printer Setup : In Maintop, go to File > Printer Setup .

: Look for the easyjet.inf or easyjet.prs file within the XP600 folder and click Open . After the driver is installed, you must configure

: Choose the newly added "EasyJet 1601 Eco" (or similar) and click Set As Default Printer . Step 3: Configuration and Calibration

: Click the Install button, then choose Custom . Step 2: Install the EasyJet XP600 Driver into

: Ensure the printer is connected via network cable (LAN) or USB, depending on your model's board.

: Adjust the gamma (often 1.1 ) and print intensity (typically 1.75 to 1.8 ) based on your ink type. Troubleshooting Tips

: Go to Options > Unit and set it to your preference (e.g., inches).