Everec 340 User Manual -

Open the lid and press the located above the keyboard. Battery Care

Everex StepNote NC1501 (Everec 340) User Manual & Setup Guide

If the fan becomes loud or the laptop shuts down unexpectedly, the heat sink may be clogged with dust. Use compressed air to blow out the vents located on the side and bottom of the unit. BIOS Access everec 340 user manual

Calibrate the battery by charging it to 100% and then letting it drain completely once.

If the laptop is used primarily at a desk, remove the battery to prevent heat degradation, though the VIA processor runs relatively cool. 3. Keyboard and Touchpad Operations Function (Fn) Keys Open the lid and press the located above the keyboard

Only use the 19V AC adapter specified for this model to avoid motherboard damage.

Connect the AC adapter to the power jack located on the rear or side of the laptop. Plug the power cord into a grounded wall outlet. BIOS Access Calibrate the battery by charging it

Before diving into operations, it is helpful to understand the hardware limitations of the Everec 340: VIA C7-M Processor (1.5 GHz) Memory: 512MB DDR2 SDRAM (Expandable to 2GB) Hard Drive: 60GB - 80GB SATA Display: 15.4" WXGA Widescreen (1280 x 800) Optical Drive: DVD-RW / CD-RW Combo Graphics: VIA Chrome9 HC IGP