Fnirsi1014d Firmware Update Work |work| -

: Use a USB data cable to connect the oscilloscope to your computer.

: If the device fails to boot after an update, you may need to manually format the internal SD card. This requires opening the device, removing the card, and formatting it to FAT32 on a PC before reinstalling the firmware.

: Copy the FSI-1014.bin file directly to the root of the oscilloscope's drive. fnirsi1014d firmware update work

: If the display appears shifted to one side after updating, you likely have a different hardware version of the screen. FNIRSI released two variants of V3.0 to account for different display manufacturers. Re-updating with the alternative V3.0 file usually fixes this.

: Visit the official FNIRSI Support Page to find the latest .bin file (typically named FSI-1014.bin ). : Use a USB data cable to connect

: Properly "eject" or "unmount" the drive from your PC before physically disconnecting the cable.

: Navigate to the oscilloscope's Menu and select USB export . Your PC should detect a new drive (approximately 8GB). : Copy the FSI-1014

: Some users report a 200mV difference between channels even after updating to V3.0. If this occurs, perform a manual calibration through the device settings without any probes connected. Custom and Community Firmware FNIRSI 1014D - How to do a Firmaware Upgrade Tutorial