Gear One Pa2400 User Manual !!link!! Guide

Features a tilt-back panel for a better viewing angle on tables and well-placed handles for transport. Setup and Operation Instructions

8 channels in total, including 7 mic/line inputs with XLR and 1/4" connectors.

Turn the FX knob until the desired preset number appears on the display, then press the knob to select it. gear one pa2400 user manual

Users have reported a loud popping sound if the mixer is turned off while speakers are connected. To avoid this, always turn your Master volumes to zero before powering down, or disconnect the speakers first.

Connect microphones via XLR cables and instruments (like keyboards or guitars) via 1/4" line inputs. For playback from external devices like phones or CD players, use the dedicated . 2. Using Built-in FX Features a tilt-back panel for a better viewing

The unique dual 7-band EQ allows you to tailor the sound separately for your audience (Mains) and your band (Monitors). This is critical for ; if a monitor begins to squeal, you can cut the specific frequency on the monitor EQ without affecting the main house sound. Troubleshooting Common Issues

If you experience feedback, check the bi-color Signal/Peak LEDs on each channel. If they are constantly red, lower the channel gain and use the 7-band graphic EQ to notch out problem frequencies. Users have reported a loud popping sound if

Built-in +15V phantom power for condenser microphones.

24-bit processor featuring 100 presets (reverb, delay, chorus, flanger, etc.).

Use the separate FX level controls for the main and monitor mixes to balance the wet/dry signal.