Kes Geyser Load Control Timer Manual New [best] (Mobile)

The controller features a 60-day battery backup to maintain your settings and clock during load shedding or power failures.

Most KES models block overrides during peak demand times (typically 06:00–08:00 and 18:00–20:00) to comply with load-balancing standards. Installation & Setup Instructions

If you need hot water outside of your selected program's schedule, you can use the feature. kes geyser load control timer manual new

Indicates the currently active timer program. Operating Profiles & Programming

The device features three primary LED status indicators and four preset profiles: Indicates the mains power is ON. Red LED: Indicates the geyser itself is ON and heating. The controller features a 60-day battery backup to

If the Blue LED is flashing but the Red LED never turns on, check if you are currently in a "Peak Time" lockout or if you have accidentally selected Program 3 (Always Off) .

Installation involves working with your distribution board (DB) and should be handled by a qualified professional. Indicates the currently active timer program

Optimized for solar setups. OFF from 08h00 to 15h00 and during all peak demand times. Prog 3 3 flashes / second

Press the Override button to switch the geyser ON immediately.