: Click Start Upload . If the project is not password-protected or restricted, the software will transfer the project files, including variables and graphics, to your PC. Method 2: Backup to a USB Flash Drive
Performing a regular is a critical maintenance task to protect industrial automation projects from data loss due to hardware failure or accidental deletion. Whether you are working with the TPC series or other embedded models, there are two primary methods for backing up your system: using a PC with configuration software or using a USB flash drive directly at the panel. Method 1: Backup via PC and MCGS Software
: Launch the MCGS configuration tool on your computer. mcgs hmi backup
: Select the USB drive as the target storage location.
: Access the panel's internal settings. On many MCGS models, this involves a specific touch sequence or finding the "Service and Commissioning" or "File Operations" menu. : Click Start Upload
: Look for the file operation icons. For example, in some TPC series menus, a disk icon with a green arrow typically represents the Backup (archive) function.
If using Ethernet, scan for the device or enter its specific IP address. Whether you are working with the TPC series
: Go to the File menu and select Upload Project . Configure Settings : Set the save path and provide a file name for your backup. Select the communication method (e.g., USB or Ethernet).