The Pro-44 uses a simple keypad entry system. To program a frequency into a specific channel, follow these steps:
You can set Channel 1 as a "Priority" channel. Press the PRI button, and the scanner will check Channel 1 every two seconds, even if it is currently listening to another frequency.
If a channel is annoying or has constant static, press MANUAL to go to that channel, then press L/OUT . The scanner will now skip this channel during its scan cycle. Netset Pro-44 Scanner Manual
Ensure the Squelch is not turned too far to the right and that the Volume is up.
Slide off the back cover and insert 6 AA batteries. Using alkaline batteries is recommended for longer life. The Pro-44 uses a simple keypad entry system
Whether you have just acquired one or found an old unit in storage, this guide serves as a functional replacement for the original manual to help you get started. Basic Specifications
This usually means you tried to enter a frequency that is outside the range of the Pro-44. Check your frequency list. If a channel is annoying or has constant
Ensure the BNC antenna is securely attached to the top jack.