Pzem-017 Software ((new)) Download May 2026

This guide provides everything you need to locate, download, and install the PZEM-017 software. Direct Links and Software Options

Open "Device Manager" on Windows. Under "Ports (COM & LPT)," you should see a COM port number assigned to your device. Installation and Setup Guide

Before the software can communicate with the module, your computer must recognize the typically bundled with the device. Chipset: Most units use the CH340 or CP2102 chip. pzem-017 software download

Debugging communication issues or verifying register data. 3. Open Source & DIY Options

Swap the A and B wires on the RS485 adapter. This is the most common hardware error. This guide provides everything you need to locate,

The PZEM-017 is a popular DC communication module used for measuring voltage, current, power, and energy in solar systems, battery banks, and industrial setups. To unlock its data logging capabilities on a PC, you need the correct software and drivers.

Connect the PZEM-017 to your DC source (0-300V) and the external shunt. Connect the RS485 terminals (A and B) to your USB-to-RS485 adapter. Install Driver: Run the CH340 or CP2102 driver installer. Run Software: Open the PZEM-017 Master software. Configure Port: Select the correct COM Port (found in Device Manager). Set Baud Rate to 9600. Set Modbus Address (Default is 0x01). Installation and Setup Guide Before the software can

Search for "CH340 Windows Driver" or "Silicon Labs CP210x USB to UART Bridge VCP Drivers."