Evoko Liso Factory Reset Verified Site

: Reconnect the power. The Liso will automatically detect the USB drive and display a 30-second countdown before starting the flash.

From here, you can manually , update the Server IP , or perform hardware Diagnostics . Updating Liso Firmware - Evoko - Biamp Cornerstone

: Use a tool like balenaEtcher or Win32 Disk Imager . evoko liso factory reset verified

If you still have access to the device and only need to change settings without a full wipe, use the : Tap the Menu/Information icon on the screen.

Select and enter your PIN or use an authorized RFID. : Reconnect the power

Insert a USB drive (at least 4GB; note that Kingston drives are often incompatible with Liso). Select the downloaded .gz image and flash it to the drive.

Ignore any Windows prompts to "format the drive" after flashing; these occur because the Liso uses a non-Windows partition. 2. Execute the Factory Reset Updating Liso Firmware - Evoko - Biamp Cornerstone

: Plug the prepared reset drive into the USB port on the back/bottom of the unit.

: Disconnect the PoE or power cable from the back of the Liso.